A&D - AD-4541 Signal Conditioner Get latest price

The AD-4541 Analog Signal Conditioner device will accept an analog (mV) input from a sensing device such as a load cell, pressure sensor, strain gauge etc and convert it to an output control signal in the form of a voltage (-2v to +2v) or a current (4 to 20mA).

Features

• Choice of Signal Outputs- (-2V to +2V) , (4mA to 20mA)
• Simple Calibration- Adjustment by potentiometer
• Zero Adjustment Range- (-0.5mV/V to + 0.5mV/V)
• Span Adjustment Range- (0.4mV/V to 3.2mV/V)
• Simple Installation- Can be snap mounted onto DIN rail or screw mounted
• Specific DIN Rail Configuration- Spring clips and a recess on the rear housing
• Spring Clip Terminal Block- No screwing required for wire termination
• Dimensions: 45mm x 122mm x 24mm per unit

To contact A&D Weighing & Inspection Specialists about A&D AD-4541 Signal Conditioner use Get a quote.

The AD-4541 Analog Signal Conditioner device will accept an analog (mV) input from a sensing device such as a load cell, pressure sensor, strain gauge etc and convert it to an output control signal in the form of a voltage (-2v to +2v) or a current (4 to 20mA).

Features

• Choice of Signal Outputs- (-2V to +2V) , (4mA to 20mA)
• Simple Calibration- Adjustment by potentiometer
• Zero Adjustment Range- (-0.5mV/V to + 0.5mV/V)
• Span Adjustment Range- (0.4mV/V to 3.2mV/V)
• Simple Installation- Can be snap mounted onto DIN rail or screw mounted
• Specific DIN Rail Configuration- Spring clips and a recess on the rear housing
• Spring Clip Terminal Block- No screwing required for wire termination
• Dimensions: 45mm x 122mm x 24mm per unit

Read less...

To contact A&D Weighing & Inspection Specialists about A&D AD-4541 Signal Conditioner use Get a quote.