Amacan P | Submersible Motor Pump
Irrigation and drainage pumping stations, for stormwater transport in stormwater pumping stations, raw and clean water transport in water and waste water treatment plants, cooling water transport in power stations and industrial plants, industrial water supply, water pollution and flood control, aquaculture.
Q (50Hz) | 360.0 – 25,200.0 (m³/h) |
H (50Hz) | 0.8 – 12.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 380 V, 400 V, 690 V, 3~ |
Explosion protection | ATEX II 2G T3 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | 1.4517 |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | 00 |
Shaft material (EN standard) | 1.4057.05, 1.4021.05 |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Axial, Open, Propeller |
Casing material (EN standard) | JL 1030 |
eClass assignment | 36410101, 36410106 |
Free passage | 255.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Energy, Mining / Dredges, Water, Waste water / sewage |
Casing material | Cast iron |
Maximum drive rating | 700.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1750.0 (1/min) |
To contact KSB Australia about Amacan P | Submersible Motor Pump use Get a quote.
Irrigation and drainage pumping stations, for stormwater transport in stormwater pumping stations, raw and clean water transport in water and waste water treatment plants, cooling water transport in power stations and industrial plants, industrial water supply, water pollution and flood control, aquaculture.
Q (50Hz) | 360.0 – 25,200.0 (m³/h) |
H (50Hz) | 0.8 – 12.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 380 V, 400 V, 690 V, 3~ |
Explosion protection | ATEX II 2G T3 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | 1.4517 |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Nozzle position | In-line |
Pump set location | 00 |
Shaft material (EN standard) | 1.4057.05, 1.4021.05 |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Axial, Open, Propeller |
Casing material (EN standard) | JL 1030 |
eClass assignment | 36410101, 36410106 |
Free passage | 255.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Energy, Mining / Dredges, Water, Waste water / sewage |
Casing material | Cast iron |
Maximum drive rating | 700.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 1750.0 (1/min) |
To contact KSB Australia about Amacan P | Submersible Motor Pump use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product