Hyjet - Water Supply & Variable Speed Pressure Pumps | HCE Series Get latest price

APPLICATION

• HCE Series Variable Speed Multistage pressure pumps are ideal for water supply to whole house, irrigation, amenity blocks, industrial wash down areas and stock watering etc. The HCE Series VSD controller can be set at a pressure within the pumps capacity which is measured with a pressure transducer on the outlet, the pump will ramp up or down as water is used on demand at the set pressure with no fluctuation making the HCE Series pumps highly efficient to run compared to traditional pumps.

FEATURES

• Efficient to Run Saving 30 – 60% on energy
• Advance AC Frequency Conversion
• Control System
• AS4020 Certified
• 2 Litre Pressure Tank
• Very Quiet Operation
• Pump Body: AISI 304 Stainless steel
• Impeller: AISI 304 Stainless Steel
• Motor Shaft: AISI 304 Stainless Steel
• Mechanical Seal: Carbon / Ceramic
• Max. Fluid Temp: 90c
• Max. Ambient Temp: 50c
• Two pole Induction Motor
• 50 Hz 1Ph 240 Volt
• Protection IP55
• Insulation Class F
• Thermal Overload Protection
• Continuous Duty

CONSTRUCTION

• Stainless steel impellers, chambers & shaft NBR carbon / ceramic mechanical seal IP55 motor Insulation class F

To contact Maxijet Australia about Hyjet Water Supply & Variable Speed Pressure Pumps | HCE Series use Get a quote.

APPLICATION

• HCE Series Variable Speed Multistage pressure pumps are ideal for water supply to whole house, irrigation, amenity blocks, industrial wash down areas and stock watering etc. The HCE Series VSD controller can be set at a pressure within the pumps capacity which is measured with a pressure transducer on the outlet, the pump will ramp up or down as water is used on demand at the set pressure with no fluctuation making the HCE Series pumps highly efficient to run compared to traditional pumps.

FEATURES

• Efficient to Run Saving 30 – 60% on energy
• Advance AC Frequency Conversion
• Control System
• AS4020 Certified
• 2 Litre Pressure Tank
• Very Quiet Operation
• Pump Body: AISI 304 Stainless steel
• Impeller: AISI 304 Stainless Steel
• Motor Shaft: AISI 304 Stainless Steel
• Mechanical Seal: Carbon / Ceramic
• Max. Fluid Temp: 90c
• Max. Ambient Temp: 50c
• Two pole Induction Motor
• 50 Hz 1Ph 240 Volt
• Protection IP55
• Insulation Class F
• Thermal Overload Protection
• Continuous Duty

CONSTRUCTION

• Stainless steel impellers, chambers & shaft NBR carbon / ceramic mechanical seal IP55 motor Insulation class F

Read less...

To contact Maxijet Australia about Hyjet Water Supply & Variable Speed Pressure Pumps | HCE Series use Get a quote.