Hylec Controls Chlorimeter Chloride Field Testing Equipment
James Instruments Chlorimeter
Chloride Field Test System
Hylec Controls Chlorimeter Chloride Field Testing Equipment
James Instruments Chlorimeter
The determination of the chloride ion concentration in concrete is essential in assessing the need for maintenance on, for example, bridge decks and parking structures.
Description
Documents
Portable Chloride Measurement Solution
18 Recent Views
The Chlorimeter Chloride Field Test System can also be used to ensure that materials used in new construction are free from potentially harmful chloride ion levels. With this method, the concentration of acid soluble chlorides is measured. In most cases, this is equivalent to total chloride concentration. A sample of powder is obtained by drilling and careful quartering. Then an accurately weighed 3gm. sample is dissolved in 20 ml of extraction liquid which consists of a precise, measured concentration of acid.
For sampling wet concrete a 3gm sample of mortar (i.e. without coarse aggregate) is used. Typically for concrete, samples that are to be analysed for chloride are obtained at various depths, thereby supplying the engineer with a chloride ion profile.
Features & Benefits
• Fast – Results within minutes at the site • Economical – Low cost per sample compared to laboratory testing • Accurate – Results are comparable to laboratory testing • Covers wide range from 0.002% to 2% chloride by weight • Internal Memory to store readings for later upload to a PC via USB • Digital display for direct reading of percentage of chloride by weight • Conforms to AASHTO-T- 260
The unit has a stainless-steel tank and two fixed baffles. We also offer as an extra, a lid with hollow legs that fits onto four locating pins mounted in the top corners of the tank. The leg height provides the lid top at bench height. The pump requires a 240V 10-amp single phase supply.
To contact Hylec Controls about Hylec Controls Test & Measurement | Chlorimeter Chloride Field Testing use Get a quote.
The Chlorimeter Chloride Field Test System can also be used to ensure that materials used in new construction are free from potentially harmful chloride ion levels. With this method, the concentration of acid soluble chlorides is measured. In most cases, this is equivalent to total chloride concentration. A sample of powder is obtained by drilling and careful quartering. Then an accurately weighed 3gm. sample is dissolved in 20 ml of extraction liquid which consists of a precise, measured concentration of acid.
For sampling wet concrete a 3gm sample of mortar (i.e. without coarse aggregate) is used. Typically for concrete, samples that are to be analysed for chloride are obtained at various depths, thereby supplying the engineer with a chloride ion profile.
Features & Benefits
• Fast – Results within minutes at the site • Economical – Low cost per sample compared to laboratory testing • Accurate – Results are comparable to laboratory testing • Covers wide range from 0.002% to 2% chloride by weight • Internal Memory to store readings for later upload to a PC via USB • Digital display for direct reading of percentage of chloride by weight • Conforms to AASHTO-T- 260
The unit has a stainless-steel tank and two fixed baffles. We also offer as an extra, a lid with hollow legs that fits onto four locating pins mounted in the top corners of the tank. The leg height provides the lid top at bench height. The pump requires a 240V 10-amp single phase supply.
Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Hylec Controls are also proudly displaying these credentials: