TradeQuip Professional - TradeQuip Professional Soda Blasting Retrofit Kit Price Guide: $124

Supplier: Ramp Champ

TradeQuip Professional Soda Blasting Retrofit Kit

TradeQuip Professional Soda Blasting Retrofit Kit for Converting Any Blaster to a Soda Blaster

In Stock

The TradeQuip Professional Soda Blasting Retrofit Kit was perfectly designed for use in tandem with the TradeQuip 19, 37 and 75 Litre Mobile Sand Blasting Kits. This retrofit kit is quick and simple to fit.

This TradeQuip Soda Blasting Retrofit Kit Soda Blasting is especially suitable for removing paint without damaging sheet metal, glass, or chrome. The TradeQuip Professional Soda Blasting Retrofit Kit also allows you to convert either a 3/8" or 1/2" sandblaster into your very own soda blaster.

Features and Benefits

Soda won't damage or warp metal
Perfect for stripping fibreglass
Environmentally friendly for use
Works and strips without chemicals

Specifications

Can be used for the TradeQuip 19, 37, and 75 Litre Mobile Sanding Kit

Fitting Instructions

Remove the Standard Manifold (See picture in fig.1)

Use a flathead screwdriver to loosen the hose clamp on the blasting hose and pull the hose off the connector.
Unscrew the air hose from the manifold.
Unscrew the manifold from the bottom of the tank.

Fit Soda Blasting Manifold (See picture in Fig. 2)

Screw in the new manifold until tight, use a spanner and ensure the air hose connection faces the back of the tank.
Screw in the air hose and tighten it with a spanner.
Push the blasting hose onto the lower connector, and tighten the clamp with a flathead screwdriver.
If the exhaust hose is not connected push it onto the remaining connector.

NOTE: Use PTFE tape on a threaded connection for an airtight seal.