Vitachrom Non Self Priming Hygienic Pressure ...

Vitachrom Non Self Priming Hygienic Pressure Pump

Supplier: KSB Australia

Service-friendly non-self-priming single-stage hygienic close-coupled pump in back pull-out design with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system.

18 Recent Views In Stock

Design

Service-friendly non-self-priming single-stage hygienic close-coupled pump in back pull-out design with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system. The pump features a semi-open impeller and electropolished surfaces. It is very easy to clean by CIP/SIP thanks to its almost complete lack of dead volume or narrow clearances. Its wetted components are made of 1.4404/1.4409 (AISI 316L/CF3M) stainless steel. Vitachrom is EHEDG-certified. All materials comply with FDA standards and EN 1935/2004. ATEX-compliant version available.

Application

Hygienic handling of fluids in the food, beverage and pharmaceutical industries as well as in the chemical industry.

Main applications

Breweries
Chemical industry
Creameries
Food and beverages
Industry engineering
Pharmaceutical/Biotechnology
Soft drinks
Sugar

Overview of technical data

Q (50Hz)	1.0 – 340.0 (m³/h)
H (50Hz)	1.0 – 100.0 (m)
Type of bearing	Rolling element and plain bearings
Casing partition	Radially split
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	1.4409 (AISI CF3M)
Type of installation	Close-coupled
Type of coupling	Direct
Type of lubrication	Grease / Product lubrication
Max. permissible fluid temperature	110.0 (°C)
Guaranteed to be silicon-free	Yes
Nozzle position	End suction
Maximum operating pressure	12 BAR
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4571
Suction characteristics	Non-priming
Suitable for drinking water	Yes
Type of casing	Annular casing
Type of impeller	00, offen, Mehrschaufelrad
Type of connection	Screw-ended, flange
UNSPSC classification	4015150300
Casing material (EN standard)	1.4404, 1.4571
eClass assignment	36410100, 36410000, 36410101
Installation position	Horizontal
Shaft seal type	Mechanical seal
Main applications	Industry and process engineering, Water, Food,beverages and pharmaceutical industry
Maximum discharge-side pressure	12.0 (bar)
Type of installation	Stationary
Maximum speed of rotation	3500.0 (1/min)

Design

Application

Hygienic handling of fluids in the food, beverage and pharmaceutical industries as well as in the chemical industry.

Main applications

Breweries
Chemical industry
Creameries
Food and beverages
Industry engineering
Pharmaceutical/Biotechnology
Soft drinks
Sugar

Overview of technical data

Q (50Hz)	1.0 – 340.0 (m³/h)
H (50Hz)	1.0 – 100.0 (m)
Type of bearing	Rolling element and plain bearings
Casing partition	Radially split
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
No. of impeller entries	Single entry
Impeller material (EN standard)	1.4409 (AISI CF3M)
Type of installation	Close-coupled
Type of coupling	Direct
Type of lubrication	Grease / Product lubrication
Max. permissible fluid temperature	110.0 (°C)
Guaranteed to be silicon-free	Yes
Nozzle position	End suction
Maximum operating pressure	12 BAR
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4571
Suction characteristics	Non-priming
Suitable for drinking water	Yes
Type of casing	Annular casing
Type of impeller	00, offen, Mehrschaufelrad
Type of connection	Screw-ended, flange
UNSPSC classification	4015150300
Casing material (EN standard)	1.4404, 1.4571
eClass assignment	36410100, 36410000, 36410101
Installation position	Horizontal
Shaft seal type	Mechanical seal
Main applications	Industry and process engineering, Water, Food,beverages and pharmaceutical industry
Maximum discharge-side pressure	12.0 (bar)
Type of installation	Stationary
Maximum speed of rotation	3500.0 (1/min)