AAQ Autolift - 2 Post Hoist | AL-9000LS – Clearfloor Heavy Duty 4000kg / 4 tonne Price Guide: $4,675 Get latest price

Read more...

To contact AAQ Australia - Advance AutoQuip about AAQ Autolift 2 Post Hoist | AL-9000LS – Clearfloor Heavy Duty 4000kg / 4 tonne use Get a quote.

2 Post Hoist – 4000kg / 4 Tonne

The AL-9000LS 2 post hoist has been designed to withstand the tough conditions of Australian mechanical workshops. With a lifting capacity of 4000kg / 4 Tonne, the 2 post car hoist is perfect for lifting 4WD such as Toyota Landcruisers and Nissan Patrols. The 2 post clearfloor hoist allows the use of transmission jacks, oil drainers, and tool chests to be wheeled around freely underneath the vehicle.

• Worksafe Design Registered gives you the peace of mind knowing the car hoist complies with Australian Standards 1418.9
• Heavy Duty Hydraulic cylinders mounted within the columns drive the lifting carriages for a smooth seamless lift of the vehicle (no chains)
• Powerful 2.2kw single or three-phase hydraulic power unit
• Safety Locking Ladders fitted to each column (100mm increments) with manual lock release operation
• Two-stage screw adjustable pads
• Safety Limit Switch cuts out the hydraulic power unit when maximum height is reached.
• Low Voltage 24volt controls for added safety

WHAT'S INCLUDED

• 2 post hoist
• M18 concrete anchor through bolts
• Single phase 240v 15amp motor / 3 phase 415v 20amp motor
• 60mm lift adapters
• Installation Manual

What’s Not Included?

• Installation
• Hydraulic Oil
• Electrical Connection (Electrician Required)

Workshop requirements

• 150mm steel mesh reinforced concrete (25-30 MPA)
• Minimum Ceiling height of 3.9m (3.65m low height setting)

(Engineered base frames available for 100 – 125mm concrete footing)

Warranty and Certification

• 5-year structural warranty*
• Australian Standard WorkSafe Design Registered

Features

• WorkSafe Design Registered
• Clear floor design for ease of working with the transmission or under lift jacks, oil drainers or tool chests.
• High-quality powder-coated finish
• Professional-quality power unit
• Safety shut off valve
• Long arm two-stage telescopic
• Short arm three stage telescopic
• Two stage screw adjustable pads
• Rubber door protectors
• Hydraulic cylinder covers
• Easy operation manual lock release
• Top limit switch cut-off
• 4 x 60mm height adapters included

Specifications

• Height overall: 3900mm or 3650mm for lower height setting.
• Width overall: 3495mm
• Lifting height: 1830-1920mm
• Lowest height: 90-205mm
• Lifting capacity: 4000kg
• Power: 240V/50Hz/1Ph (15 Amp) or 415V/50Hz/#Ph (20 Amp)
• Gross weight: 750kg
• Packing Size: 2850*940*450 mm

Read less...

To contact AAQ Australia - Advance AutoQuip about AAQ Autolift 2 Post Hoist | AL-9000LS – Clearfloor Heavy Duty 4000kg / 4 tonne use Get a quote.