DTS SPM Torque Meters 1% | SPM-0502

DTS - SPM Torque Meters 1% | SPM-0502

Supplier: Crimp-Tech Australia

SPM Torque Meters 1% | SPM-0502

Digitool Solutions SPM-0502 – 3/8″ Sq Dr 5-50 ft lb ( 6.8-67.8Nm )Electronic Portable Torque Meter – ± 1% Accuracy in Both Directions

In Stock

Torque Meter Pro – ± 1% Accuracy in Both Directions

±1% accuracy of torque from 10% – 100%.
Torque applicable in both CW & CCW
Useable from 4% of full scale with ±3% of reading.
Warning LED, Buzzer and Vibration
Li-Ion Polymer rechargeable battery
Up to 300 hours of continuous operation
Charger adaptor 110-240V AC included
Self contained Torque meter
Easy to use. No Training needed
Auto power off after 2 minutes
Eliminates hand position error

Simple Intuitive user Interface

The “SPM” series of self-contained electronic torque meters is built on a Digitool Solutions’ exclusive rotatable platform. These meters transform any large wrench or non-impact driver into a high-precision torque instrument. They feature a simple, intuitive user interface for torque preset of fastener installation specifications. Tri-colored visual indicators, an audible signal and a tactile vibration provide preset alerts at torque attainment. Built on a robust square-drive extension and Installed between the tool and the work, these meters are free of hand-hold position error that is typical of common torque wrenches.

Torque Measurement Accuracy Within ±1% of Setting

These Torque Meter Pro’s function in both CW and CCW directions while maintaining torque measurement accuracy within ±1% of setting from 10% to 100% of full scale. The meter can be used down to 4% of full-scale setting while retaining a +/-3% accuracy. With extra-precision torque sensing and higher resolution analog-to digital conversion, the SPM is intended for critical industrial, aerospace, laboratory and quality control applications. The nylon housing is robust enough for tough field use. A built-in rechargeable Li-Ion battery system provides 300-hours of continuous operation. A global 110-240VAC wall transformer is included for charging.
Each meter is compliance with ISO-6789-2003, ASME B107.28-2005 (Type 2) Standards and N.I.S.T.

A certification of calibration can be provided if requested.

Model	Drive	Range			Length		Weight
Model	Drive	(in-lb)	(ft-lb)	(Nm)	inch	mm	lbs	kg
SPM-0502	3/8″	24 – 600	2 – 50	3 – 67.8	3.5″ X 2″	88.9X51	1.3	0.59
SPM-1002	3/8″	48 – 1200	4 – 100	6 – 135	3.5″ X 2″	88.9X51	1.3	0.59
SPM-1503	1/2″	72 – 1800	6 – 150	8 – 200	3.75″ X 2″	94X51	1.5	0.68
SPM-2503	1/2″	120 – 3000	10 – 250	13.5 – 340	3.75″ X 2″	94X51	1.5	0.68
SPM-4004	3/4″	192 – 4800	16 – 400	21.5 – 542	4.5″ X 2″	114X51	2.0	0.91
SPM-6004	3/4″	288 – 7200	24 – 600	32.5 – 813	4.5″ X 2″	114X51	2.0	0.91

To contact Crimp-Tech Australia about DTS SPM Torque Meters 1% | SPM-0502 use Get a quote.

Torque Meter Pro – ± 1% Accuracy in Both Directions

±1% accuracy of torque from 10% – 100%.
Torque applicable in both CW & CCW
Useable from 4% of full scale with ±3% of reading.
Warning LED, Buzzer and Vibration
Li-Ion Polymer rechargeable battery
Up to 300 hours of continuous operation
Charger adaptor 110-240V AC included
Self contained Torque meter
Easy to use. No Training needed
Auto power off after 2 minutes
Eliminates hand position error

Simple Intuitive user Interface

Torque Measurement Accuracy Within ±1% of Setting

A certification of calibration can be provided if requested.

Model	Drive	Range			Length		Weight
Model	Drive	(in-lb)	(ft-lb)	(Nm)	inch	mm	lbs	kg
SPM-0502	3/8″	24 – 600	2 – 50	3 – 67.8	3.5″ X 2″	88.9X51	1.3	0.59
SPM-1002	3/8″	48 – 1200	4 – 100	6 – 135	3.5″ X 2″	88.9X51	1.3	0.59
SPM-1503	1/2″	72 – 1800	6 – 150	8 – 200	3.75″ X 2″	94X51	1.5	0.68
SPM-2503	1/2″	120 – 3000	10 – 250	13.5 – 340	3.75″ X 2″	94X51	1.5	0.68
SPM-4004	3/4″	192 – 4800	16 – 400	21.5 – 542	4.5″ X 2″	114X51	2.0	0.91
SPM-6004	3/4″	288 – 7200	24 – 600	32.5 – 813	4.5″ X 2″	114X51	2.0	0.91