Engine Protection Module | DE004
On acceptance of a start signal a latching relay energises the govenor run solenoid and supplies a delayed signal to the starter motor pilot solenoid. Four latching alarm circuits become operative once the engine has reached speed. A timer inhibits alarms 2, 3 and 4 for up to 15 seconds during starting. Additionally alarm 4 has a 5 second delay. A by-pass switch enables the engine to be run with a signal on any circuit except number 1 (e.g. for fault finding). Normall alarm 1 which can not be inhibited or delayed is used for overspeed. An alarm signal will de-energise the run relay, activate the particular alarm indicator and energise the air shutoff mechanism( if fitted) shutting down the engine.
The alarm circuit must be reset, before restarting is possible.
Specifications:
Supply voltage: |
12 or 24V DC negative return |
the alarms require a positive switched DC signal |
|
Relay contacts: |
6 Amp 240 Volt AC max |
Starter pilot solenoid drive: |
8 Amp maximum |
fixed time delay 0.25 seconds nominal |
|
AirBox damper dirve: |
8 Amp maximum (Detroit Diesel only) |
Run relay drive: |
3 Amps |
Alarm indicators: |
600mA maximum |
Dimensions(approximate): |
215mm(L) x 135mm(W) x 67mm(H) |
Weight(approximate): |
1kg |
Finish: |
Grey hammer tone stoved enamel |
To contact Gammatron about Engine Protection Module | DE004 use Get a quote.
On acceptance of a start signal a latching relay energises the govenor run solenoid and supplies a delayed signal to the starter motor pilot solenoid. Four latching alarm circuits become operative once the engine has reached speed. A timer inhibits alarms 2, 3 and 4 for up to 15 seconds during starting. Additionally alarm 4 has a 5 second delay. A by-pass switch enables the engine to be run with a signal on any circuit except number 1 (e.g. for fault finding). Normall alarm 1 which can not be inhibited or delayed is used for overspeed. An alarm signal will de-energise the run relay, activate the particular alarm indicator and energise the air shutoff mechanism( if fitted) shutting down the engine.
The alarm circuit must be reset, before restarting is possible.
Specifications:
Supply voltage: |
12 or 24V DC negative return |
the alarms require a positive switched DC signal |
|
Relay contacts: |
6 Amp 240 Volt AC max |
Starter pilot solenoid drive: |
8 Amp maximum |
fixed time delay 0.25 seconds nominal |
|
AirBox damper dirve: |
8 Amp maximum (Detroit Diesel only) |
Run relay drive: |
3 Amps |
Alarm indicators: |
600mA maximum |
Dimensions(approximate): |
215mm(L) x 135mm(W) x 67mm(H) |
Weight(approximate): |
1kg |
Finish: |
Grey hammer tone stoved enamel |
To contact Gammatron about Engine Protection Module | DE004 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product