Leda - Thicknesser | 20” (508mm) 1-Phase 3HP Get latest price

Read more...

To contact Specialised Joinery Supplies about Leda Thicknesser | 20” (508mm) 1-Phase 3HP use Get a quote.

Specifications

• 508mm (20”) maximum working width.
• 200mm (8”) maximum working height.
• Driven serrated infeed roller in front of cutterhead.
• Driven smooth outfeed roller behind cutterhead.
• Anti-kick back device at infeed position.
• Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
• Two idle rollers on top of machine to allow easy return of timber to operator.
• Cast iron extensions in front and at rear of work table.
• Handwheel rise and fall of work table through four round threaded columns, driven by chain below work table.
• Rubber sleeves on all four columns to eliminate dust.
• Locking knob to hold table at required height.
• Measurement scale and pointer to set table height.
• Dust extraction chute on rear of machine of 127mm diameter.
• Magnetic push button switch with overload protection.
• Three rollers beneath machine for mobility.

Technical Data

• Width of work table 510 mm
• Length of working table 653 mm
• Maximum depth of cut in one pass 4 mm
• Minimum length of unbutted workpiece 171 mm
• Two feed speeds by gear change 4.8 or 6.2 metres/min
• Cutterhead diameter 80 mm
• Rotation speed of cutterhead 5000 rpm
• Cutterhead and feed drive motor Single Phase 3 hp
• Nett weight of machine 430 kgs
• Single Phase 3 hp or Three Phase 5hp

Read less...

To contact Specialised Joinery Supplies about Leda Thicknesser | 20” (508mm) 1-Phase 3HP use Get a quote.