Norbar Hand Torque Multiplier (Square ...
is a good alternative for applications where standard wrenches can't gain correct torque due to space restrictions. Usage is simple:Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.
Norbar HAND TORQUE MULTIPLIER - 5:1 Ratio HT-3 | ||||||||||
Model | Torque Output Max | Gear Ratio |
Square Drive Size | Dimensions | Weight Kg | |||||
---|---|---|---|---|---|---|---|---|---|---|
Ft Lbs | Nm | Input | Output | A (mm) | B (mm) | C (mm) | D (mm) | |||
HT3 - 1300 | 100 to 960 | 130 to 1,300 | 5:1 | 1⁄2" | 3⁄4" | 108 | 126 | 210 | 180 | 4.3 |
HT3- 2700 | 200 to 2,000 | 270 to 2,700 | 5:1 | 3⁄4" | 1" | 108 | 128 | 210 | 186 | 4.3 |
The HT-5 Hand Torque Multiplier comes complete with 2 Reaction Arms.
One standard dog-leg bar generally used to locate against the nut next to the nut being tightened.
The other , a longer bar type arm for locating against a housing or any Reaction Point near the Nut being tighened.
series offers the workplace serious torque solutions. Higher ratios means even smaller torque wrenches can be used. The HT-4 also features a Anti Backlash pawl to retain any wind-up. Available in 15:1 or 25:1 gear ratios more torque is for less effort. Supplied in lockable carry case.
Norbar HAND TORQUE MULTIPLIERS - High Ratio HT-4 | ||||||||||
Model | Torque Output Max | Ratio | Square Drive Size | Dimensions | Weight Kg | |||||
---|---|---|---|---|---|---|---|---|---|---|
Ft Lbs |
Nm |
Input | Output | A (mm) | B (mm) | C (mm) | D (mm) | |||
HT4-15.5 | 220 to 2,200 | 300 to 3,000 | 15.5:1 | 1⁄2" | 1" | 108 | 156 | 450 | n/a | 8 |
HT4-26 | 330 to 3,300 | 450 to 4,500 | 26:1 | 1⁄2" | 1" | 108 | 173 | 450 | n/a | 8.9 |
Norbar Standard Series MULTIPLIERS - High Torque Ratios
Norbar Standard Series MULTIPLIERS - High Torque Ratios | |||||||||||
Model | Torque Max | Ratio | Square Drive Size | Dimensions | Tool Weight Kg |
Reaction Arm Weight Kg |
|||||
---|---|---|---|---|---|---|---|---|---|---|---|
Nm | Ft Lb | Input | Output | A | B | C Min | C max | ||||
1 | 1700 | 1250 | 5:1 | 1⁄2" | 3⁄4" | 108 | 106 | 83 | 217 | 3 | 2.2 |
2/5 | 1700 | 1250 | 5:1 | 3⁄4" | 1" | 108 | 126 | 83 | 217 | 3 | 2.2 |
2/25 Fitted with AWUR |
1700 | 1250 | 25:1 | 1⁄2" | 1" | 108 | 141.5 | 83 | 217 | 5.6 | 2.2 |
5/5 | 3400 | 2500 | 5:1 | 3⁄4" | 1" | 119 | 142.1 | 86 | 264 | 4.7 | 2.5 |
5/25 Fitted with AWUR |
3400 | 2500 | 25:1 | 1⁄2" | 1" | 119 | 167.6 | 86 | 264 | 7.5 | 2.5 |
6/5 | 3400 | 2500 | 5:1 | 3⁄4" | 1-1⁄2" | 119 | 144.7 | 86 | 264 | 4.7 | 2.5 |
6/25 Fitted with AWUR |
3400 | 2500 | 25:1 | 1⁄2" | 1-1⁄2" | 119 | 172 | 86 | 264 | 7.5 | 2.5 |
Entry Level . . . The Norbar Highwayman Series
Entry Level . . . The Norbar highwayman series Torque Multipliers offer handy solutions for general engineering. Driven by a hand torque wrench the 5:1 gear ratio provides a multiplying torque gain. Perfect for hard to get to areas and to improve torque accuacy when doing up bolting. Also ideal for non powered sites or workshops.
Supplied as a kit. Included is a lockable black case, drop down dog leg reaction arm and a straight bar reaction arm. Hand Torque wrench not included. Impact Sockets should be used.
To contact Hire Torque Tools Victoria about Norbar Hand Torque Multiplier (Square Drive) use Get a quote.
is a good alternative for applications where standard wrenches can't gain correct torque due to space restrictions. Usage is simple:Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.
Norbar HAND TORQUE MULTIPLIER - 5:1 Ratio HT-3 | ||||||||||
Model | Torque Output Max | Gear Ratio |
Square Drive Size | Dimensions | Weight Kg | |||||
---|---|---|---|---|---|---|---|---|---|---|
Ft Lbs | Nm | Input | Output | A (mm) | B (mm) | C (mm) | D (mm) | |||
HT3 - 1300 | 100 to 960 | 130 to 1,300 | 5:1 | 1⁄2" | 3⁄4" | 108 | 126 | 210 | 180 | 4.3 |
HT3- 2700 | 200 to 2,000 | 270 to 2,700 | 5:1 | 3⁄4" | 1" | 108 | 128 | 210 | 186 | 4.3 |
The HT-5 Hand Torque Multiplier comes complete with 2 Reaction Arms.
One standard dog-leg bar generally used to locate against the nut next to the nut being tightened.
The other , a longer bar type arm for locating against a housing or any Reaction Point near the Nut being tighened.
series offers the workplace serious torque solutions. Higher ratios means even smaller torque wrenches can be used. The HT-4 also features a Anti Backlash pawl to retain any wind-up. Available in 15:1 or 25:1 gear ratios more torque is for less effort. Supplied in lockable carry case.
Norbar HAND TORQUE MULTIPLIERS - High Ratio HT-4 | ||||||||||
Model | Torque Output Max | Ratio | Square Drive Size | Dimensions | Weight Kg | |||||
---|---|---|---|---|---|---|---|---|---|---|
Ft Lbs |
Nm |
Input | Output | A (mm) | B (mm) | C (mm) | D (mm) | |||
HT4-15.5 | 220 to 2,200 | 300 to 3,000 | 15.5:1 | 1⁄2" | 1" | 108 | 156 | 450 | n/a | 8 |
HT4-26 | 330 to 3,300 | 450 to 4,500 | 26:1 | 1⁄2" | 1" | 108 | 173 | 450 | n/a | 8.9 |
Norbar Standard Series MULTIPLIERS - High Torque Ratios
Norbar Standard Series MULTIPLIERS - High Torque Ratios | |||||||||||
Model | Torque Max | Ratio | Square Drive Size | Dimensions | Tool Weight Kg |
Reaction Arm Weight Kg |
|||||
---|---|---|---|---|---|---|---|---|---|---|---|
Nm | Ft Lb | Input | Output | A | B | C Min | C max | ||||
1 | 1700 | 1250 | 5:1 | 1⁄2" | 3⁄4" | 108 | 106 | 83 | 217 | 3 | 2.2 |
2/5 | 1700 | 1250 | 5:1 | 3⁄4" | 1" | 108 | 126 | 83 | 217 | 3 | 2.2 |
2/25 Fitted with AWUR |
1700 | 1250 | 25:1 | 1⁄2" | 1" | 108 | 141.5 | 83 | 217 | 5.6 | 2.2 |
5/5 | 3400 | 2500 | 5:1 | 3⁄4" | 1" | 119 | 142.1 | 86 | 264 | 4.7 | 2.5 |
5/25 Fitted with AWUR |
3400 | 2500 | 25:1 | 1⁄2" | 1" | 119 | 167.6 | 86 | 264 | 7.5 | 2.5 |
6/5 | 3400 | 2500 | 5:1 | 3⁄4" | 1-1⁄2" | 119 | 144.7 | 86 | 264 | 4.7 | 2.5 |
6/25 Fitted with AWUR |
3400 | 2500 | 25:1 | 1⁄2" | 1-1⁄2" | 119 | 172 | 86 | 264 | 7.5 | 2.5 |
Entry Level . . . The Norbar Highwayman Series
Entry Level . . . The Norbar highwayman series Torque Multipliers offer handy solutions for general engineering. Driven by a hand torque wrench the 5:1 gear ratio provides a multiplying torque gain. Perfect for hard to get to areas and to improve torque accuacy when doing up bolting. Also ideal for non powered sites or workshops.
Supplied as a kit. Included is a lockable black case, drop down dog leg reaction arm and a straight bar reaction arm. Hand Torque wrench not included. Impact Sockets should be used.
To contact Hire Torque Tools Victoria about Norbar Hand Torque Multiplier (Square Drive) use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product