Plating Electronic Electroplating & ...
The latest high frequency PE SWITCH MODE Plating Rectifiers / Power Supplies made in Germany, are designed to meet the demands of the modern Electroplating Industry.
PE Switch Mode Technology is proven and reliable. They offer many advantages over conventional type Rectifiers, especially SCR - Thyristor Controlled.
APPLICATIONS of Electroplating and Electrowinning Switch Mode Rectifiers / Power Supplies - pe 1000 Series:
• Anodising
• Automatic Plating Lines
• Cathodic Protection
• Electro Forming
• Electro Paint
• Electro Polishing
• Electro Winning
• Laboratory
• Manual Plating Lines
• Precious Metal Plating
• Precision Metal Finishing
• Printed Circuit Boards
• Reel-to-Reel Plating
• Wafer Plating
• Water Treatment
STANDARD FEATURES OF PE1000 SERIES PLATING RECTIFIER / POWER SUPPLY
• High efficiency Switch Mode Technology
• Proven long life reliability
• Constant current operation and
• Constant voltage operation
• Variable Output from 0 Volts & 0 Amps
• Precise Current and Voltage Regulation
• Fast response to AC Input & DC Output variations
• Extremely small in size and light weight
• Easy to install
• Insensitive to Input Phase Sequence
• Very good Power Factor, typically 0.95
• Lower electricity demand
• Very low output ripple
• EMC Compliance. C-Tick & CE
Plating Rectifier / Power Supply PE1000 series
IDEALLY SUITED FOR:
• Anodising
• Electroplating
• Brush Plating
PE1000 PLATING RECTIFIER / POWER SUPPLY SERIES FEATURES
• Ranges from 10 Amp to 200 Amp
• Output Ripple less than 1%
• Digital Volt Meter and Ammeter
• Presettable current
• Portable unit with Carry Handles
RECTIFIER / POWER SUPPLY OPTIONAL EXTRAS
• Output DC reversing switch
• Amp minute meter with Totaliser and presetable up/down count
• Audible Alarms
For further information about PE1000 Plating Rectifier / Power Supply visit Australian Rectifiers at http://www.australianrectifiers.com.au
OR
Use the IndustrySearch e-mail feature below and one of the Australian Rectifiers team will respond directly.
To contact Australian Rectifiers about Plating Electronic Electroplating & Electrowinning Switch Mode Rectifiers | pe1000 Series use Get a quote.
The latest high frequency PE SWITCH MODE Plating Rectifiers / Power Supplies made in Germany, are designed to meet the demands of the modern Electroplating Industry.
PE Switch Mode Technology is proven and reliable. They offer many advantages over conventional type Rectifiers, especially SCR - Thyristor Controlled.
APPLICATIONS of Electroplating and Electrowinning Switch Mode Rectifiers / Power Supplies - pe 1000 Series:
• Anodising
• Automatic Plating Lines
• Cathodic Protection
• Electro Forming
• Electro Paint
• Electro Polishing
• Electro Winning
• Laboratory
• Manual Plating Lines
• Precious Metal Plating
• Precision Metal Finishing
• Printed Circuit Boards
• Reel-to-Reel Plating
• Wafer Plating
• Water Treatment
STANDARD FEATURES OF PE1000 SERIES PLATING RECTIFIER / POWER SUPPLY
• High efficiency Switch Mode Technology
• Proven long life reliability
• Constant current operation and
• Constant voltage operation
• Variable Output from 0 Volts & 0 Amps
• Precise Current and Voltage Regulation
• Fast response to AC Input & DC Output variations
• Extremely small in size and light weight
• Easy to install
• Insensitive to Input Phase Sequence
• Very good Power Factor, typically 0.95
• Lower electricity demand
• Very low output ripple
• EMC Compliance. C-Tick & CE
Plating Rectifier / Power Supply PE1000 series
IDEALLY SUITED FOR:
• Anodising
• Electroplating
• Brush Plating
PE1000 PLATING RECTIFIER / POWER SUPPLY SERIES FEATURES
• Ranges from 10 Amp to 200 Amp
• Output Ripple less than 1%
• Digital Volt Meter and Ammeter
• Presettable current
• Portable unit with Carry Handles
RECTIFIER / POWER SUPPLY OPTIONAL EXTRAS
• Output DC reversing switch
• Amp minute meter with Totaliser and presetable up/down count
• Audible Alarms
For further information about PE1000 Plating Rectifier / Power Supply visit Australian Rectifiers at http://www.australianrectifiers.com.au
OR
Use the IndustrySearch e-mail feature below and one of the Australian Rectifiers team will respond directly.
To contact Australian Rectifiers about Plating Electronic Electroplating & Electrowinning Switch Mode Rectifiers | pe1000 Series use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product