Tecnair Electric Drive | Single Carriage ...

Tecnair - Electric Drive | Single Carriage Rectangular Profile – EDF Series

Supplier: Tecnair

Electric Drive | Single Carriage Rectangular Profile – EDF Series

Single Carriage Rectangular Profile – EDF Series

In Stock

Single Carriage Rectangular Profile – EDF Series

EDF Double Carriage drives use the same flat bodied profile as the EDF Single Carriage version but is fitted with two carriages and two bearing slides (option H). When operated the two carriages travel in opposite directions making it ideal for automatic door operation. Special versions which allow both carriages to move in the same direction are available upon request, this version is more suited to handling heavier duty, wider loads. EDF Double Carriage models are available in size 42mm only. Interface plates are available for all types of electrical motor/gearbox combinations and supplied as a kit to include motor shaft extension and drive coupling.

Type	Linear drive with single carriage for X Y axis
Profile Size	42 x 75mm
Mounting	T slots on either side of extrusion profile
Maximum Stroke Length	3 metres
Minimum Stroke Length	100 mm
Operating Temperature	Max + 80° Min -10° (check drive motor techincal data)
Speed	3 metres/sec
Pully Drive Ratio	130 mm
Number of Belt Pulley Teeth	26
Pully Diameter	41.39 mm
Maximum RPM	2000 g/min
Bearing Rail Types	H	L
Number of Bearing Rail Blocks	2	1
Base Weight at Zero Stroke (Kg)	2.7	2.5
Weight per 100mm of Stroke (Kg)	0.5	0.5
Zero Load Torque (Nm)	0.08	0.08
Maximum Radial Load on Input Shaft (N)	250	250
Maximum Allowable Drive Shaft Torque (Nm)	12.7	12.7

To contact Tecnair about Tecnair Electric Drive | Single Carriage Rectangular Profile – EDF Series use Get a quote.

Single Carriage Rectangular Profile – EDF Series

Type	Linear drive with single carriage for X Y axis
Profile Size	42 x 75mm
Mounting	T slots on either side of extrusion profile
Maximum Stroke Length	3 metres
Minimum Stroke Length	100 mm
Operating Temperature	Max + 80° Min -10° (check drive motor techincal data)
Speed	3 metres/sec
Pully Drive Ratio	130 mm
Number of Belt Pulley Teeth	26
Pully Diameter	41.39 mm
Maximum RPM	2000 g/min
Bearing Rail Types	H	L
Number of Bearing Rail Blocks	2	1
Base Weight at Zero Stroke (Kg)	2.7	2.5
Weight per 100mm of Stroke (Kg)	0.5	0.5
Zero Load Torque (Nm)	0.08	0.08
Maximum Radial Load on Input Shaft (N)	250	250
Maximum Allowable Drive Shaft Torque (Nm)	12.7	12.7