Truflow - Portable Spray Booths Get latest price

Read more...

To contact TruFlow Spray Booths about Truflow Portable Spray Booths use Get a quote.

Portable Spray Booths

• TRUFLOW Engineered Spray Cube™ Product
• Industrial, Automotive and Commerical Applications
• Fully portable
• Standard 20ft and 40 ft Options
• Automotive: Fold out Design
• Industrial: Self contained
• Ready to Run
• Plug in and Spray
• 3 phase & 240Volt options
• Heated and Non-Heated
• Gas / Electric or Diesel
• Options: On-board compressor
• Options: On-board Generator
• Fully compliant to AS/NZS 4114.1:2003 and 4114.2:2003
• Exhaust filtration with EU2 (99%) Dry filtration.

INDUSTRIAL

20ft or 40ft Spray Cube By TRUFLOW

Spray Anywhere with the cube.
The TRUFLOW SPRAY CUBE® is a conversion of a standard shipping container into a professional high quality spray booth that meets Australian Standards 4114.1:2003. The Spray booth is designed with all of the functions and safety features you would expect of an enclosed spray booth with the added flexibility of a container, allowing for the spray booth to be easily moved and used from contract to contract.

What is the Spray Cube?
The spray booth is designed as a cross-flow system with airflow rates of .5mps at the open face. The spray booth will then remove all paint contaminates prior to being expelled through the 3phase or optional 240Volt Motor. Internal walls are cladded with white color bond insulated panel to provide a reflective and smooth environment, lighting is incorporated and rated to AS/NZS standards meeting flame proof requirements.

All you need is a standard 240v 20Amp electrical connection, or a 3 phase 20 Amp + Neutral Connection and you are ready to go. A full control board provides safety features including pre-and post purge timers, safety alarms and thermal protection.
The TRUFLOW SPRAY CUBE® is available as standard 20ft and 40ft units with customized options available on request.

Filtered Doors

Filtered doors fitted behind the solid door set ensure a clean filtered environment inside the spray booth that can be sealed and locked when not in use. The main doors also provide weather protection for external installations.

Plug in and spray

All you need is 3 phase power plugged in and you’re ready to go ( 240 Volt is an Option). Once the spray cube is on your site or moved to a new site you will need to bolt on your ductwork and plug in your 3 phase power and start spraying.  Compressor or compressed air outlets should also be connected to your interlocking plug to allow for internal air regulation for your spray gun.

20ft or 40ft Cabin

The cabin work area in a spray cube is clean, fully compliant and not unlike a fixed position high quality spray booth. Fully insulated wall panels clad the work area and pressurized ventilated lights create a bright working environment. The filters are EU2 rated compliant with EPA regulations and ensure paint stopping capability of 99% efficiency.

Transport anywhere

The spray cube can be sent Australia wide and offshore. TRUFLOW currently has units in operation Australia wide and in the Asia’s. Providing a safe and fully compliant spraying environment the SPRAY CUBE ™ is unbeatable in value and safety

AUTOMOTIVE

20ft or 40ft Spray Cube By TRUFLOW

Spray Anywhere with the cube.

The TRUFLOW SPRAY CUBE® is a conversion of a standard shipping container into a professional high quality spray booth that meets Australian Standards 4114.1:2003. The Spray booth is designed with all of the functions and safety features you would expect of an enclosed spray booth with the added flexibility of a container, allowing for the spray booth to be easily moved and used from contract to contract.

What is the Spray Cube?
The spray booth is designed as a cross-flow system with airflow rates of .5mps at the open face. The spray booth will then remove all paint contaminates prior to being expelled through the 3phase or optional 240Volt Motor. Internal walls are cladded with white color bond insulated panel to provide a reflective and smooth environment, lighting is incorporated and rated to AS/NZS standards meeting flame proof requirements.

All you need is a standard 240v 20Amp electrical connection, or a 3 phase 20 Amp + Neutral Connection and you are ready to go. A full control board provides safety features including pre-and post purge timers, safety alarms and thermal protection.
The TRUFLOW SPRAY CUBE® is available as standard 20ft and 40ft units with customized options available on request.

Drop off to site

The spray cube is transported on any standard side-loader, ready to be dropped off to site anywhere in Australia or even the world.

Setup 60 minutes

Once on site the spray cube is packed in a simple fold out design. Fold out the side wings, attached ducts, fit the filters and plug it in – Your ready to go!

Up and running

Setup of the spray cube is normally 30 – 60 minutes. So simple that anyone can do it. Once power is plugged in or generator ( if option choosen) is activated you are ready to spray!

Spraying and baking

The same conventional quality environment you expect from any Automotive Booth. Clean air, bright lighting and the option of heating/baking.

CUSTOM DESIGNED

Let us design a Spray Cube for you.

Spray Anywhere with the spray cube.

Do you need a unique mobile solution for painting, sanding, extraction or preparation. Let the experienced engineering team at TRUFLOW design a system to suit your needs.

No matter the mobile problem, be it remote spray painting and shelters or multiple cubes to make a large area or even a solution which requires heating and cooling; The TRUFLOW Team have experience in this sector.

• Containment Extraction Walls for Blast and Paint
• Pipeline painting projects
• Australian Defence Force Spray Painting
• Heated and Cooled applications
• Paint Mixing Rooms
• Hazardous Storage Systems
• Clean Rooms
• Sanding and Preparation Rooms

Trailer Spray Booth

If you require a towable spray booth then look no further than this example designed by TRUFLOW for mobile training and demonstrations – it runs on 240 Volt power thanks to an on board inverter.

40ft Custom Build

Made for remote spray painting of pipes and steelwork in remote NT this example allowed users to spray paint their products along the entire length of the project bringing the spray booth to the part rather than the part to the spraybooth!

Heated Training Booth

Made for remote spray painting of pipes and steelwork in remote NT this example allowed users to spray paint their products along the entire length of the project bringing the spray booth to the part rather than the part to the spraybooth!

Extraction Wall Spray Cube

A ready to go extraction wall complete with compliant on board controls meeting 4114.1:2003 standards, ductwork and filtration. The Spray cube can be fitted to an igloo system for a spray area type containment typically used in remote and on site blast and paint projects.

Read less...

To contact TruFlow Spray Booths about Truflow Portable Spray Booths use Get a quote.