Ucontrol Current Transformer Seneca - T201DC CT Get latest price

Read more...

To contact Ucontrol about Ucontrol Current Transformer Seneca - T201DC CT use Get a quote.

Key Features:

• PATENT MEASUREMENT TECHNOLOGY
• High precision (0,2%) 
• Configurable input from 5 to 40 Adc 
• Output 4..20 mA (loop powered) 
• Compact size: 38 x 40 x 20 mm (Ø 12,5 mm)
• Suitable for batteries, battery chargers, Solar Panels, power units and generic dc loads.

Technical Specification:

• Accuracy class | 0.2 | 0.1% + 14 µA (measure) 0.05% + 4 µA (output)
• Max error Coeff. temperatura < 150 ppm/K EMI error < 50 µA 100 ms (without filter) 600 ms (with filter)
• Response time Protection degree IP 20
• Operating temperature -10..+65°C
• Humidity 10..90% non condensing
• Weight 47 g
• Dimensions 38 x 40 x 20 mm
• Enclosure PBT, black
• Mouting DIN rail guide
• Configuration DIP-switches (range, filter)
• Norms CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742

Input

• Connetion Passing-  through hole
• Hole diameter - 12,5mm, 1/2 “
• Range Monopolar :  0..5 / 0..10 / 0..20 / 0..40 A Bipolar: -5..+5 / -10..+10 / -5..+20 / -10..+40A
• Maximum rating > 1.000 A ± 300 A (correct reading range)
• AC overlying (f > 35 Hz)  -15..+50 A (allowable peak value) -10..+32 A (Full-wawe rectified) -5..+16 A (Half-wawe rectified)
• Isolation When a sheathed wire is used, the insulation voltage is set by sheath properties. It’s stated 1 KVdc

Output:

• Type -  Passive current loop 4..20 mA
• Terminals - Screw terminal pitch 5.08mm for max 2.5mm2 cables
• Min, voltage - 6v
• Max voltage - 30 V (directly wired) 100 V (with added resistor) 120 V (pulsed, directly wired) 
• Other protection - Polarity reversal. Loop current limiting on hardware fault. Over-temperature
• Max power dissipation - 650 mW continuous. 2.5 W pulsed (10 s). 1500 W.ms on surge (500 V, 40 )

Read less...

To contact Ucontrol about Ucontrol Current Transformer Seneca - T201DC CT use Get a quote.