ZETEC Eddy Current Tester | MIZ-21C
Advanced Hand-held Eddy Current Testing
Introducing MIZ-21C, the most advanced handheld instrument with surface array capabilities.
The truly affordable MIZ-21C is ideal for aerospace, oil & gas, manufacturing and power generation
applications. Its ergonomic design, long battery life and intuitive touchscreen enable the user to
inspect more areas faster than ever without fatigue.
With new features that include a fully sealed unit, increased operating temperature range,
up to 10 hours of battery life, increased internal storage capacity and more, MIZ-21C maximizes
inspection efficiency and value.
Save time and money
MIZ-21C is a fast, highly portable and cost-effective replacement for Liquid Penetrant Testing (PT)
and Magnetic Particle Testing (MT) inspections. The surface array option can reduce inspection time
by up to 95% versus pencil probes.
MIZ-21C’s intuitive touchscreen and simple, yet powerful emb
Inspect more areas
The MIZ-21C is designed for user comfort. It can be held for twice as long as other Eddy Current
portable devices. The small form factor enables users to inspect hard-to-reach areas and components
that other instruments can’t. MIZ-21C brings the power of surface array to places it has never been before.
Improve flaw detection
MIZ-21C features an industry-leading signal quality providing up to 25% better flaw detection
capability. When coupled with surface array, users can be confident that MIZ-21C will deliver the most
thorough inspection in its class.
Designed for a wide range of applications
MIZ-21C delivers an inspection advantage across numerous inspection applications including:
Detecting Cracks Near Fastener Holes. Pencil probes are ideal for detecting small cracks in close proximity to fastener holes. The inspector uses a known crack or notch standard to set up the MIZ-21C signal display. Then, while scanning the test piece, the inspector can estimate the depth and length of surface cracks by comparing the phase and amplitude of the generated eddy current signal to the standard’s signal.
Multi-Layer Corrosion Inspection. Identifying corrosion is one of the most critical and complex aspects of airframe inspections. Changes in skin thickness as well as varying multi-layer structures usually make it difficult to recognize signals. The MIZ-21C has the power to penetrate thick sections. Exceptional signal-to-noise ratio helps inspectors distinguish even a small loss of material. Dual-frequency with mixing nearly eliminates the unwanted signals caused by varying air gaps between layers that can “mask” the signal of interest.
Conductivity and Coating Thickness Measurement. Use digital conductivity measurements (resistivity) to characterize/sort materials. Directly measure the conductivity of metals and alloys, such as aluminum structures, using dedicated conductivity probes that have a broad operating frequency range. Or measure a non-conductive coating such as paint. The MIZ-21C offers a wide measurement range for both conductivity and thickness.
Three models to meet your needs and budget
For inspection applications that demand highly portable eddy current or eddy current array capabilities, the MIZ-21C is the only choice.
Cost effective, highly portable surface array solution
When the MIZ-21C is used along with Zetec Surf-X Array Probes, it’s the most cost-effective, portable surface array solution in the market. This solution delivers significant inspection advantages over Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT).
FEATURES
MIZ-21C is packed with features for an inspection advantage
MIZ-21C is an affordable and capable handheld device that can handle inspections
virtually anywhere. With best in class features that not only save time but open the
door to new inspection possibilities.
SPECIFICATIONS
Specifications listed here are subject to change.
Size (H × W × D) | 267 × 122 × 38 mm (10.5 × 4.8 × 1.5 in) |
Weight (including batteries and cover) | 1.2 kg (2.6 lb) |
Multi-Touch Display | 5.7 in (480 x 640 pixels) |
Battery Life | Up to 10 hours |
Eddy Current Connector | 18-Pin Lemo |
Eddy Current Array Connector | 26-Pin Lemo |
Connectivity | USB 2.0, Wi-Fi, Bluetooth |
Encoders | 2 axes, quadrature |
Probe Recognition and Setup | Automatic with Zetec ID Chip |
Coil Inputs | MIZ-21C-SF: 1, MIZ-21C: 1, MIZ-21C-ARRAY: 3 |
Frequencies Per Timeslot | MIZ-21C-SF: 1, MIZ-21C: 2, MIZ-21C-ARRAY: 2 |
Data Channels | MIZ-21C-SF: 32, MIZ-21C: 64, MIZ-21C-ARRAY: 192 |
Maximum Probe Coils | MIZ-21C-SF: 2, MIZ-21C: 2, MIZ-21C-ARRAY: 32 |
Frequency Range | 5 Hz to 10 MHz |
Generator Output | Up to 12 Vpp (19 Vpp for ECA) in 0.1 Volt increments |
Injection Modes | Continuous and Super-Multiplex |
Receiver Gain | 10 to 123 dB |
Data Resolution | 16 bits |
Probe Drive | 50 Ohm |
Filters | Median, High Pass, Low Pass, High Pass 2 (Adjustable CC), Bandpass, Spike, SNR |
Alarms | Adjustable Box, Sector, and Polar, Audio adjustable volume, Headphone support |
Conductivity Frequency | 60, 120, 240 and 480 kHz |
Conductivity Specification | Digital readout in 0.9 to 110 %IACS (0.5 to 70 MS/m), Accuracy within ±0.5% IACS from 0.9% to 65% IACS and within ±1.0% of values over 65% |
Non-Conductive Coating Thickness | Can measure non-conductive coating thickness from 0 mm to 1.000 mm. Accuracy of 0.025 mm (±0.001 in.) over a 0 mm to 0.64 mm range |
Rotating Scanner | MIZ-21C-SF: No, MIZ-21C: Yes, MIZ-21C-ARRAY: Yes Zetec Rotating Scanner, Others |
Maximum Data File Size | 60 s or 10 meters |
Languages | English, Spanish, French, German, Chinese, Japanese, Portuguese |
Storage | 128 GB |
Instrument Calibration | Compliant with ISO/IEC 17025:2005, Meets or exceeds manufacturer’s requirments |
Voltage | 100 to 240 VAC, Auto-Switching |
Frequency | 50 to 60 Hz |
Output Voltage | 15 VDC |
Maximum Power | 40 W |
Operating Temperature | -10°C to 50°C (14°F to 122°F) |
Storage Temperature | -20°C to 70°C (-4°F to 158°F) (w/out batteries) |
Relative Humidity | 95% non-condensing |
To contact Alliance Solutions Group about ZETEC Eddy Current Tester | MIZ-21C use Get a quote.
Advanced Hand-held Eddy Current Testing
Introducing MIZ-21C, the most advanced handheld instrument with surface array capabilities.
The truly affordable MIZ-21C is ideal for aerospace, oil & gas, manufacturing and power generation
applications. Its ergonomic design, long battery life and intuitive touchscreen enable the user to
inspect more areas faster than ever without fatigue.
With new features that include a fully sealed unit, increased operating temperature range,
up to 10 hours of battery life, increased internal storage capacity and more, MIZ-21C maximizes
inspection efficiency and value.
Save time and money
MIZ-21C is a fast, highly portable and cost-effective replacement for Liquid Penetrant Testing (PT)
and Magnetic Particle Testing (MT) inspections. The surface array option can reduce inspection time
by up to 95% versus pencil probes.
MIZ-21C’s intuitive touchscreen and simple, yet powerful emb
Inspect more areas
The MIZ-21C is designed for user comfort. It can be held for twice as long as other Eddy Current
portable devices. The small form factor enables users to inspect hard-to-reach areas and components
that other instruments can’t. MIZ-21C brings the power of surface array to places it has never been before.
Improve flaw detection
MIZ-21C features an industry-leading signal quality providing up to 25% better flaw detection
capability. When coupled with surface array, users can be confident that MIZ-21C will deliver the most
thorough inspection in its class.
Designed for a wide range of applications
MIZ-21C delivers an inspection advantage across numerous inspection applications including:
Detecting Cracks Near Fastener Holes. Pencil probes are ideal for detecting small cracks in close proximity to fastener holes. The inspector uses a known crack or notch standard to set up the MIZ-21C signal display. Then, while scanning the test piece, the inspector can estimate the depth and length of surface cracks by comparing the phase and amplitude of the generated eddy current signal to the standard’s signal.
Multi-Layer Corrosion Inspection. Identifying corrosion is one of the most critical and complex aspects of airframe inspections. Changes in skin thickness as well as varying multi-layer structures usually make it difficult to recognize signals. The MIZ-21C has the power to penetrate thick sections. Exceptional signal-to-noise ratio helps inspectors distinguish even a small loss of material. Dual-frequency with mixing nearly eliminates the unwanted signals caused by varying air gaps between layers that can “mask” the signal of interest.
Conductivity and Coating Thickness Measurement. Use digital conductivity measurements (resistivity) to characterize/sort materials. Directly measure the conductivity of metals and alloys, such as aluminum structures, using dedicated conductivity probes that have a broad operating frequency range. Or measure a non-conductive coating such as paint. The MIZ-21C offers a wide measurement range for both conductivity and thickness.
Three models to meet your needs and budget
For inspection applications that demand highly portable eddy current or eddy current array capabilities, the MIZ-21C is the only choice.
Cost effective, highly portable surface array solution
When the MIZ-21C is used along with Zetec Surf-X Array Probes, it’s the most cost-effective, portable surface array solution in the market. This solution delivers significant inspection advantages over Liquid Penetrant Testing (PT) and Magnetic Particle Testing (MT).
FEATURES
MIZ-21C is packed with features for an inspection advantage
MIZ-21C is an affordable and capable handheld device that can handle inspections
virtually anywhere. With best in class features that not only save time but open the
door to new inspection possibilities.
SPECIFICATIONS
Specifications listed here are subject to change.
Size (H × W × D) | 267 × 122 × 38 mm (10.5 × 4.8 × 1.5 in) |
Weight (including batteries and cover) | 1.2 kg (2.6 lb) |
Multi-Touch Display | 5.7 in (480 x 640 pixels) |
Battery Life | Up to 10 hours |
Eddy Current Connector | 18-Pin Lemo |
Eddy Current Array Connector | 26-Pin Lemo |
Connectivity | USB 2.0, Wi-Fi, Bluetooth |
Encoders | 2 axes, quadrature |
Probe Recognition and Setup | Automatic with Zetec ID Chip |
Coil Inputs | MIZ-21C-SF: 1, MIZ-21C: 1, MIZ-21C-ARRAY: 3 |
Frequencies Per Timeslot | MIZ-21C-SF: 1, MIZ-21C: 2, MIZ-21C-ARRAY: 2 |
Data Channels | MIZ-21C-SF: 32, MIZ-21C: 64, MIZ-21C-ARRAY: 192 |
Maximum Probe Coils | MIZ-21C-SF: 2, MIZ-21C: 2, MIZ-21C-ARRAY: 32 |
Frequency Range | 5 Hz to 10 MHz |
Generator Output | Up to 12 Vpp (19 Vpp for ECA) in 0.1 Volt increments |
Injection Modes | Continuous and Super-Multiplex |
Receiver Gain | 10 to 123 dB |
Data Resolution | 16 bits |
Probe Drive | 50 Ohm |
Filters | Median, High Pass, Low Pass, High Pass 2 (Adjustable CC), Bandpass, Spike, SNR |
Alarms | Adjustable Box, Sector, and Polar, Audio adjustable volume, Headphone support |
Conductivity Frequency | 60, 120, 240 and 480 kHz |
Conductivity Specification | Digital readout in 0.9 to 110 %IACS (0.5 to 70 MS/m), Accuracy within ±0.5% IACS from 0.9% to 65% IACS and within ±1.0% of values over 65% |
Non-Conductive Coating Thickness | Can measure non-conductive coating thickness from 0 mm to 1.000 mm. Accuracy of 0.025 mm (±0.001 in.) over a 0 mm to 0.64 mm range |
Rotating Scanner | MIZ-21C-SF: No, MIZ-21C: Yes, MIZ-21C-ARRAY: Yes Zetec Rotating Scanner, Others |
Maximum Data File Size | 60 s or 10 meters |
Languages | English, Spanish, French, German, Chinese, Japanese, Portuguese |
Storage | 128 GB |
Instrument Calibration | Compliant with ISO/IEC 17025:2005, Meets or exceeds manufacturer’s requirments |
Voltage | 100 to 240 VAC, Auto-Switching |
Frequency | 50 to 60 Hz |
Output Voltage | 15 VDC |
Maximum Power | 40 W |
Operating Temperature | -10°C to 50°C (14°F to 122°F) |
Storage Temperature | -20°C to 70°C (-4°F to 158°F) (w/out batteries) |
Relative Humidity | 95% non-condensing |
To contact Alliance Solutions Group about ZETEC Eddy Current Tester | MIZ-21C use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product