Amalgen Isolated and Non Isolated DC DC ...
Input voltage capability is from 56 Volts to within a few volts of the nominated output. Standard outputs offered are 5 volts, 12 volts and 24 Volts as these are the most needed outputs. Special outputs are available. A green LED is provided on the front to indicate output power available.
Specifications:
General specification | |
Size: | 22.5W x 68H x 120D |
Mounting: | 35mm DIN-rail |
Housing: | Polycarbonate |
Protection: | IP40 |
Connections: | Screw terminals |
Weight: | 175g |
Non-Isolated Models | |
Load regulation: | 1% no load to full load |
Line regulation: | 1% over full input range |
Total noise: | 50mV R.M.S. max. |
Protection: | Input fused |
Current limit: | 4A approx. |
Ambient temp range: | 0-55° Celsius |
Isolated Models | |
Input voltage range: | ± 10% |
Input filter: | PI network |
Input protection: | Internal fuse |
Output voltage accuracy: | ± 4% |
Line regulation: | 0.6% full input range |
Load regulation: | 1% no load to full load |
Total noise: | 25mV R.M.S. max. |
Short circuit protection: | Momentary |
To contact Dyne Industries about Amalgen Isolated and Non Isolated DC DC Converters | Model 6080 use Get a quote.
Input voltage capability is from 56 Volts to within a few volts of the nominated output. Standard outputs offered are 5 volts, 12 volts and 24 Volts as these are the most needed outputs. Special outputs are available. A green LED is provided on the front to indicate output power available.
Specifications:
General specification | |
Size: | 22.5W x 68H x 120D |
Mounting: | 35mm DIN-rail |
Housing: | Polycarbonate |
Protection: | IP40 |
Connections: | Screw terminals |
Weight: | 175g |
Non-Isolated Models | |
Load regulation: | 1% no load to full load |
Line regulation: | 1% over full input range |
Total noise: | 50mV R.M.S. max. |
Protection: | Input fused |
Current limit: | 4A approx. |
Ambient temp range: | 0-55° Celsius |
Isolated Models | |
Input voltage range: | ± 10% |
Input filter: | PI network |
Input protection: | Internal fuse |
Output voltage accuracy: | ± 4% |
Line regulation: | 0.6% full input range |
Load regulation: | 1% no load to full load |
Total noise: | 25mV R.M.S. max. |
Short circuit protection: | Momentary |
To contact Dyne Industries about Amalgen Isolated and Non Isolated DC DC Converters | Model 6080 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product