DC-DC Converter | 300 SERIES 19" Rack ...
Up to 6 units (1.8kW) can be housed in a single 3RU 19" subrack enclosure.
The DC DC Converter converts a single primary DC Voltage to the required single output Voltage.
Nominal inputs available are 110VDC, 48VDC, 24VDC or 12VDC.
Nominal outputs available are 12VDC, 24VDC or 48VDC.
The input and output are fully isolated; this enables connection of input and output polarity (earthing/common) as required.
The equipment is housed in a rugged 19" 3RU rack mounting enclosure with the input and output terminals on the rear and the indicators on the front panel.
Features:
Function:
The equipment is protected against input reverse polarity by a diode across the input, which causes an internal fuse to trip.
The equipment is fitted with both common mode and differential mode input and output filter to minimise EMI emissions that are produced by switch mode operation.
The switching converter is a current mode. Push Pull configuration operating at approximately 50 kHz.
The output voltage is monitored by the supervisory circuit, which regulates the output voltage and activates converter shutdown and alarm for over voltage and activates the alarm for under voltage conditions.
The alarm outputs are Voltage free relay contacts that can be configured for normally closed (open on alarm) or normally open (close on alarm).
The primary current is monitored by a current transformer, which activates pulse by pulse current limiting in the case of an over current condition (constant current) and shuts down the converter in the case of a short circuit.
A thermistor is fitted to the heatsink which shuts down the converter if the temperature exceeds the thermal threshold.
Indicators display the status of input voltage, output voltage, over/under voltage (alarm) conditions.
The output is fitted with an isolation schottky diode enabling 2 or more converters to be connected in parallels for load sharing or redundancy applications.
The system is modular and individual modules plug into a 3RU subrack frame allowing maximum flexibility. Single or dual input and single and dual output systems can be easily configured as well as polarity change between input and output.
Options:
Output monitor (Uses 1 converter space)
Load distribution (Uses 2 converter spaces)
Connector interface PCB
3 way backplane PCB
4 way backplane PCB
Blanking panels
Click here to download product brochure
To contact Benbro Electronics about DC-DC Converter | 300 SERIES 19" Rack Mount 3RU Eurocard Modular use Get a quote.
Up to 6 units (1.8kW) can be housed in a single 3RU 19" subrack enclosure.
The DC DC Converter converts a single primary DC Voltage to the required single output Voltage.
Nominal inputs available are 110VDC, 48VDC, 24VDC or 12VDC.
Nominal outputs available are 12VDC, 24VDC or 48VDC.
The input and output are fully isolated; this enables connection of input and output polarity (earthing/common) as required.
The equipment is housed in a rugged 19" 3RU rack mounting enclosure with the input and output terminals on the rear and the indicators on the front panel.
Features:
Function:
The equipment is protected against input reverse polarity by a diode across the input, which causes an internal fuse to trip.
The equipment is fitted with both common mode and differential mode input and output filter to minimise EMI emissions that are produced by switch mode operation.
The switching converter is a current mode. Push Pull configuration operating at approximately 50 kHz.
The output voltage is monitored by the supervisory circuit, which regulates the output voltage and activates converter shutdown and alarm for over voltage and activates the alarm for under voltage conditions.
The alarm outputs are Voltage free relay contacts that can be configured for normally closed (open on alarm) or normally open (close on alarm).
The primary current is monitored by a current transformer, which activates pulse by pulse current limiting in the case of an over current condition (constant current) and shuts down the converter in the case of a short circuit.
A thermistor is fitted to the heatsink which shuts down the converter if the temperature exceeds the thermal threshold.
Indicators display the status of input voltage, output voltage, over/under voltage (alarm) conditions.
The output is fitted with an isolation schottky diode enabling 2 or more converters to be connected in parallels for load sharing or redundancy applications.
The system is modular and individual modules plug into a 3RU subrack frame allowing maximum flexibility. Single or dual input and single and dual output systems can be easily configured as well as polarity change between input and output.
Options:
Output monitor (Uses 1 converter space)
Load distribution (Uses 2 converter spaces)
Connector interface PCB
3 way backplane PCB
4 way backplane PCB
Blanking panels
Click here to download product brochure
To contact Benbro Electronics about DC-DC Converter | 300 SERIES 19" Rack Mount 3RU Eurocard Modular use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product